iviviv
11-01 09:17 PM
Are passport photographs needed?
TheOmbudsman
09-01 03:17 PM
Ah, so Berkeleybee is she. Oh, that makes sense, that's why she is a bee.
That was a hard working moderator who seems to have disappeared off of the face of the earth in early June 2006. I don't think she was abducted by aliens, because she is one.
I wanted to start this thread in members only, but it wouldn't let me.
Thanks.
That was a hard working moderator who seems to have disappeared off of the face of the earth in early June 2006. I don't think she was abducted by aliens, because she is one.
I wanted to start this thread in members only, but it wouldn't let me.
Thanks.
GC_ASP
05-14 12:42 PM
You are right. It would take approximately 9-12 months before she can get her GC. A friend of mine in the same situation. He added his wife to the GC application last year when PD was current. He got his GC in August 2010, but his wife is still waiting for the GC. It all depends on 485 processing dates and FBI name check etc....but she will get EAD/AP in few months....
Texas Processing Center shows August 11,2010 for
Application to Register Permanent Residence or to Adjust Status Employment-based adjustment applications
I am thinking it may take 6-7 months or am I wrongly interpreting this information posted online....
Texas Processing Center shows August 11,2010 for
Application to Register Permanent Residence or to Adjust Status Employment-based adjustment applications
I am thinking it may take 6-7 months or am I wrongly interpreting this information posted online....
Kitiara
10-17 05:22 AM
You like my drawing? Thank you very much. :) I'm not much cop at the fantastic Photoshop stuff - a lot of these guys seem to be able to do them blindfold (Eilsoe, Edwin, I'm talking about you here :) ). I tend to stick more to line art. I did write a tutorial on how to do it for kirupa.com. It's buried under Flash MX - Special Effects - Line Art or something similar. It's cheating really, as I draw by hand first, scan in then trace in Flash. But sometimes you can get really nice effects.
I'm about to try playing around with Fireworks now for those animations. Stupid of me really, I've got it here on my PC, but I never thought of using it. Duh... Fingers crossed it'll work out. As far as I can tell, it's Imageready that's bumping up the file size...
I'm about to try playing around with Fireworks now for those animations. Stupid of me really, I've got it here on my PC, but I never thought of using it. Duh... Fingers crossed it'll work out. As far as I can tell, it's Imageready that's bumping up the file size...
more...
jatinr
09-27 06:50 AM
Did some one call USCIS to get receipt numbers? Any pointers to calling USCIS...what do i give as reference numbers?
Thanks.
FP and 485 will have same receipt number
Thanks.
FP and 485 will have same receipt number
cybergold
04-28 10:25 AM
Hey Pom, where is Senocular's Robot, it was a very nice one.
more...
stuckin140
01-31 09:27 AM
What are the requirements to port from eb3 to eb2 with just an i 140 approved? I am happy with my current employer. I have worked with this company for 5 years now. I have a master's from a well known university in the US. At the time of applying for gc, attorney and company advised to file in eb3.
Thanks.
Thanks.
pcbadgujar
09-22 03:45 PM
Hi PCS,
I would appreciate if you confirm if the notarized experience letter is accepted as substitute for the original experience letter. I am planning use a preapproved labor but the job requirement for that labor requires some specific skills. My old employer would not give me the letter. So can I ask my colleague to send me a notarized experience letter ?
Thanks,
pcbadgujar
I would appreciate if you confirm if the notarized experience letter is accepted as substitute for the original experience letter. I am planning use a preapproved labor but the job requirement for that labor requires some specific skills. My old employer would not give me the letter. So can I ask my colleague to send me a notarized experience letter ?
Thanks,
pcbadgujar
more...
girishvar
08-15 12:09 PM
You have to use I-824 if you change the consulate, if it is a consular case. If your I-94 is extended within america, there is no need. However because of PIMS, it is better to initiate a I-824 and get confirmation before proceeding for stamping. It is better to check your lawyer to get the right legal advise.
ashneels2001
12-06 11:14 AM
In thi case you can only get GC if you remain alive while serving the US Army. Remember they want to put you in front of the enemy first before they pu their citizens.
more...
sodh
07-11 09:37 PM
Everything has its charm once, try something creative.
sunny1000
10-10 01:32 AM
the reason is faulty data uscis and dos has been publishing.
And now to fix the issue "releasing faulty data" the solution they have implemented is "not publish the data" :)
rofl :):):)
And now to fix the issue "releasing faulty data" the solution they have implemented is "not publish the data" :)
rofl :):):)
more...
thesparky007
05-24 10:19 PM
Sheesh someone is in a hurry :|!hurry?
i posted that on the 16th
it has been about 8 days
@kirupa:ok,thanks
i posted that on the 16th
it has been about 8 days
@kirupa:ok,thanks
richana
01-22 05:58 PM
Apply for CP asap it takes about 6 months from the date of application to get the GC if you are current. In the meanwhile re-assess your situation and apply for the H1-B in the interim you may have a denial but the CP is still in queue and H1-B rejection has no bearing on the CP application. If and when you are alloted the number for the resident status they cannot deny your GC on any other reason but that the company was a fraud or your petition had fraudulent information. If you do not meet the conditions above then your app is in jeopardy. Hope this helps. Good Luck
more...
copsmart
12-28 06:34 PM
I think, you should check with an Immigration Attorney before you risk your wife�s multiple entry Visitor Visa.
My take:
AFAIK, staying beyond the I-94 expiration date will abandon her Visitor Visa, and she could be denied entry next time.
In your wife�s case, you have applied for a change-of-status, however a decision has not yet been made, so she should leave the country before the I-94 expiration date and come back later after the F1 is approved. But, leaving the country while the change-of-status application is pending might cancel the change-of-status application, and not the underlying F1 application. So, your wife may have to get a F1 visa stamping abroad to come back later.
The above said information is purely based on my knowledge and may vary from an Attorney�s view.
Good Luck!
My take:
AFAIK, staying beyond the I-94 expiration date will abandon her Visitor Visa, and she could be denied entry next time.
In your wife�s case, you have applied for a change-of-status, however a decision has not yet been made, so she should leave the country before the I-94 expiration date and come back later after the F1 is approved. But, leaving the country while the change-of-status application is pending might cancel the change-of-status application, and not the underlying F1 application. So, your wife may have to get a F1 visa stamping abroad to come back later.
The above said information is purely based on my knowledge and may vary from an Attorney�s view.
Good Luck!
clif
03-01 01:44 PM
Friends,
I have Canada PR since October 2006. In October this year I will complete 3 years since landing in Canada. The rule to maintain PR is that one should live in Canada for at least 2 years in a 5 year period. Since I have not lived in Canada more that a couple of weeks since landing, will I be allowed to move to Canada after completing 3 years outside Canada or will I be sent back from the border? Has anyone moved to Canada after living outside for more than 3 years since landing? Please advise.
Thanks.
I have Canada PR since October 2006. In October this year I will complete 3 years since landing in Canada. The rule to maintain PR is that one should live in Canada for at least 2 years in a 5 year period. Since I have not lived in Canada more that a couple of weeks since landing, will I be allowed to move to Canada after completing 3 years outside Canada or will I be sent back from the border? Has anyone moved to Canada after living outside for more than 3 years since landing? Please advise.
Thanks.
more...
MatsP
June 14th, 2005, 08:07 AM
You can use extension tubes for all lenses on either Nikon or Canon cameras (obviously, on a Canon, they need to have Canon mount, and on a Nikon thye need to be Nikon mount).
Canon (and/or Nikon) may be using some special conversion signalling in the extension tube to inform the camera of the extension tubes existance. The teleconverters from Canon does this, whilst some other teleconverters of non-Canon brand do not. However, I think the extension tubes are much simpler animals, so they're probably just straight through connection of wires.
On Nikon, really old lenses are able to work with modern cameras, but some of the automatic functions aren't able to work (obvious things like the autofocus doesn't work on non-AF lenses, and you may not be able to use automatic aperture settings, which also may mean that the camera doesn't know the aperture and can't do automatic time selection either... How much functionality is lost depends on the age of the lens).
Canon on the other hand made a "big changeover", where they obsoleted the old mount and made a complete new, incompatible one when they introduced autofocus some 20 or so years ago.
--
Mats
Canon (and/or Nikon) may be using some special conversion signalling in the extension tube to inform the camera of the extension tubes existance. The teleconverters from Canon does this, whilst some other teleconverters of non-Canon brand do not. However, I think the extension tubes are much simpler animals, so they're probably just straight through connection of wires.
On Nikon, really old lenses are able to work with modern cameras, but some of the automatic functions aren't able to work (obvious things like the autofocus doesn't work on non-AF lenses, and you may not be able to use automatic aperture settings, which also may mean that the camera doesn't know the aperture and can't do automatic time selection either... How much functionality is lost depends on the age of the lens).
Canon on the other hand made a "big changeover", where they obsoleted the old mount and made a complete new, incompatible one when they introduced autofocus some 20 or so years ago.
--
Mats
anai
06-20 08:48 AM
When I saw the title of the thread, I first thought Dan Quayle is posting on immigration voice.
singhsa3
11-04 08:11 PM
Check your private msg
Singhsa, I know. At this point, I am looking for alternatives. Please let me know if you have seen such experiences and what USCIS has done in such cases.
Singhsa, I know. At this point, I am looking for alternatives. Please let me know if you have seen such experiences and what USCIS has done in such cases.
kirupa
04-16 01:47 AM
Dean - you have posted in about 5 or 6 threads just rambling about what you don't like. If you don't like the stamp style, it's cool, try to make your own better ones ;)
Quit complaining!
Quit complaining!
OLDMONK
07-06 11:47 AM
Another 10-20 Questions like these would definitely get the ball rolling @ washington post hopefully.
No comments:
Post a Comment